RFID Labeling Packaging Hot Melt Adhesive TPR Bonding TPR-2002A
RFID Packaging Hot Melt Adhesive
,labeling Packaging Hot Melt Adhesive
,TPR hot melt bonding
Custom new arrival Yellow Solid Block Hot Melt Adhesives for RFID (Radio Frequency Identification) Label
TPR-2002A
Wanli® pressure sensitive hot melt adhesive TPR-2002A for RFID label is a TPR (Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-2002A is specifically developed for RFID label and adhesive tape. TPR-2002A is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-2002A is used for RFID(radio frequency identification) label and adhesive tape.
| Application Material | RFID (Radio Frequency Identification) Label |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | RFID(Radio Frequency Identification) Label |
| Solid Content | 100% |
| Operating Temperature | 160～180 ℃ |
| Softening Temperature | About 110 ℃ |
| Melt Viscosity | About 5000 mpa·s (180℃) |
| Ring Initial Viscosity |
About 30N/2.5cm/ Stainless Steel Plate (Measured at 23 ℃ and 45g/ m2 on PET) |
| Peeling @180˚ | About 25.0N/2.5cm/ Stainless Steel Plate |
| Curing | Normal Temperature Curing |
| Usage Scope | RFID(Radio Frequency Identification) Label and Adhesive Tape |
| Shelf Life | 1 Year |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Rare aging resistance.
USER GUIDE
TPR-2002A is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store TPR-2002A where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
