Solid Yellow Hot Melt Pressure Sensitive Adhesive TPR PSA Adhesive TPR-6559S
yellow hot melt pressure sensitive adhesive
,solid hot melt pressure sensitive adhesive
,TPR psa adhesive
Factory Hot Sale Yellow Solid Block WANLI® Reactive Hot Melt TPR-6559S for Quick and Easy Adhesive Tape Production Application And High Viscosity, High Peeling Strength, Good Aging Resistance
Wanli® pressure sensitive hot melt adhesive TPR-6559S for adhesive tape is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-6559S is specifically developed for quick and easy adhesive tape. TPR-6559S is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-6559S is used for quick and easy adhesive tape.
| Application Material | Adhesive Tape |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | PSA Hot Melt Adhesive for Adhesive Tape |
| Solid Content | 100% |
| Operating Temperature | 160～180 ℃( Depend On Machine, Substrate, Environment And Other Conditions) |
| Softening Temperature | About 124℃ |
| Melt Viscosity | About 30000mpa·s (175℃) |
| Ball Initial Viscosity | ≥8# |
| Peeling @180˚ | 7N/2.5cmAbout 30N/2.5cm on Stainless Steel Plate (Measured at 23℃ and 20g/ m2 on PET) |
| Usage Scope | Quick and Easy Adhesive Tape |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
Very high viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-6559S is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
