Packaging Hot Melt Pressure Sensitive Adhesives Rubber 8500 Cps Glue Tape TPR-6#B
packaging Hot Melt Pressure Sensitive Adhesives
,rubber Hot Melt Pressure Sensitive Adhesives
,8500 cps hot melt glue tape
Adhesive Tape-TPR-6#B
Wanli® pressure sensitive hot melt adhesive 6#B for adhesive tape is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. 6#B is specifically developed for dust removal paper adhesive tape and removable adhesive tape. 6#B is featured high viscosity, lower peeling strength, good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive 6#B is used for dust removal paper adhesive tape and removable adhesive tape.
| Application Material | Adhesive Tape |
| Appearance | Yellow Transparent Solid Block |
| Component | TPR |
| Application Industry | Adhesive Tape |
| Solid Content | 100% |
| Operating Temperature | 140～180 ℃( Depend On Machine, Substrate, Environment And Other Conditions) |
| Softening Temperature | 100±5℃ |
| Melt Viscosity | 8500±1500mpa·s (160℃) |
| Ball Initial Viscosity | ≥15# (Measured at 23 ℃ and 35g/ m2 on PET) |
| Peeling @180˚ | 11.0±3.0N/2.5cm/ Stainless Steel Plate |
| Usage Scope | Dust Removal Paper Adhesive Tape and Removable Adhesive Tape |
| Shelf Life | 1 Year |
| Package | 20Kg/Carton, 500Kg/Carton |
FEATURE
High viscosity.
Low peeling strength.
Good aging resistance.
USER GUIDE
PSA 6#B is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 140℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
