Lamination Yellow Hot Glue Woodworking TPR Packaging TPR-2003
lamination hot glue woodworking
,yellow hot glue woodworking
,TPR hot melt packaging
Good Quality Factory Directly Yellow Solid Block Pressure Sensitive Hot Melt Adhesive WANLI® TPR-2003 with Viscosity About 16000mpa·s (160℃) & About 7500mpa·s (180℃) For Mute Pad Flat Lamination Bonding to Flooring
Wanli® pressure sensitive hot melt adhesive TPR-2003 for woodworking flat lamination is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-2003 is developed for mute pad flat lamination bonding to flooring. PSA TPR-2003 is featured high viscosity, good peeling strength, excellent aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-2003 is used for mute pad flat lamination bonding to flooring.
| Application Material | Floor Mute Pad Lamination Bonding Hot Melt Adhesives |
| Appearance | Yellow Block |
| Component | TPR |
| Application Industry | Woodworking Flat Lamination Bonding |
| Solid Content | 100% |
| Operating Temperature | 150～180 ℃ |
| Softening Temperature | Around 108℃ |
| Melt Viscosity | Around 16000mpa·s (160℃) Around 7500mpa·s (180℃) |
| Peeling @180˚ | Around 30.0N/2.5cm/45μm/ Stainless Steel Plate |
| Lasting Adhesive | ≥72 Hours |
| Usage Scope | Floor Mute Pad Flat Lamination Bonding |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
Good peeling strength.
Excellent aging resistance.
USER GUIDE
The package of PSA TPR-2003 is suitable for all standard dispensing equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store PSA TRP-2003 at arears of dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
