Solid Hot Melt Paper Lamination Adhesive Yellow Glue PUR-886
solid paper lamination adhesive
,hot melt paper lamination adhesive
,yellow lamination glue
Good Quality Factory Directly Low Cost Reactive PUR Hot Melt WANLI® PUR-886 with Higher Initial Strength for PVC, Leather, Veneer, PET , Melamine Impregnated Paper And Other Surface Materials During Flooring Flat Lamination Bonding
Wanli® PUR hot melt adhesive PUR-886 for flat lamination bonding is a single-component reactive PUR hot melt adhesive with 100% solid content. PUR-886 can be used for the bonding of various wood base, EVA foam, PC foam and other substrates. PUR-886 has higher initial strength for PVC, leather, veneer, PET , melamine impregnated paper and other surface materials. PUR-886 is featured stable viscosity under heating at a certain temperature, high initial bonding strength and final strength. After curing, PUR-886 has good peel strength, good heat and humidity resistance and chemical resistance.
APPLICATION
Wanli® PUR hot melt adhesive PUR-886 is used for flat lamination bonding. PUR-886 can be used for the bonding of various wood base, EVA foam, PC foam and other substrates. PUR-886 has higher initial strength for PVC, leather, veneer, PET , melamine impregnated paper and other surface materials.
| Application Material | Woodworking Flat Lamination Hot Melt Adhesives |
| Appearance | Yellow Solid |
| Component | PUR (Polyurethane) |
| Application Industry | Woodworking Flat Lamination Bonding |
| Solid Content | 100% |
| Operating Temperature | 160±5℃ |
| Melt Viscosity | About 5000mPa·s@160℃(Brookfield-ASTMD3236) |
| Open Time | 2~3min@25℃ |
| Usage Scope | Flat Lamination Bonding of Various Wood-based, EVA Foam, PC Foam etc. |
| Shelf Life | 6 Months |
| Package | 2Kg/Bag, 20Kg/Barrel |
FEATURE
Stable viscosity under heating at a certain temperature.
High initial bonding strength and final strength.
PUR-886 has good peel strength, good heat and humidity resistance and chemical resistance after curing.
USER GUIDE
The package of PUR-886 is suitable for various dispensing equipment.
The recommended operating temperature is 160±5℃.
In order to achieve complete curing, it is better to place finished product in a working environment with suitable temperature and humidity (recommended temperature: 23~25℃, about 65% relative humidity).
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
