Diaper Bonding Hot Melt Adhesives TPR-6552 Medical Grade
Diaper Bonding Hot Melt Adhesives
,Medical Grade Hot Melt Adhesives
,Disposable Diaper Hook Hot Melt Adhesive
China Factory Promotion Disposable Diaper Hook Bonding PSA Hot Melt Adhesives WANLI® TPR-6552 with Viscosity About 45000mpa·s (175℃) And High Viscosity, High Peeling Strength, Good Aging Resistance
Wanli® pressure sensitive hot melt adhesive TPR-6552 for disposable diaper bonding is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-6552 is specifically developed for disposable diaper hook bonding. TPR-6552 is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-6552 is used for disposable diaper hook bonding.
| Application Material: | Disposable Diaper Hook Hot Melt Adhesive |
| Appearance: | Light Transparent Block |
| Component: | TPR |
| Application Industry: | PSA Hot Melt Adhesive for Disposable Diaper Bonding |
| Solid Content: | 100% |
| Operating Temperature: | 170℃～190℃( Depend On Machine, Substrate, Environment And Other Conditions) |
| Softening Temperature: | Around 120℃ |
| Melt Viscosity: | Around 45000mpa·s (175℃) |
| Peeling @180˚: | ≥27N/2.5cm on Stainless Steel Plate |
| Ring Initial Viscosity: | ≥24N/2.5cm |
| Lasting Adhesive: | ≥720H(at 23℃ and 35g/㎡ on Stainless Steel Plate/PET) |
| Usage Scope: | Disposable Diaper Hook Bonding |
| Shelf Life: | 12 Months |
| Package: | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-6552 is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 170℃~190℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store Wanli® PSA pressure sensitive hot melt adhesive TPR-6552 where it’s dry, cool and avoid direct sunlight. The storage temperature should be not more than 35℃ and away from open fire or heat source.
