PSA Hot Melt Adhesive Pellets Mats Bonding Packaging TPR-7217A
PSA hot melt adhesive pellets
,mats hot melt adhesive pellets
,bonding hot melt packaging adhesive
Factory Direct High Quality Car Floor Mats Bonding PSA Hot Melt Adhesive WANLI® TPR-7217A Yellow Solid Block with Viscosity About 18000mpa·s (180℃) And High Viscosity, High Peeling Strength, Good Aging Resistance
Wanli® pressure sensitive hot melt adhesive TPR-7217A for vehicle interior decoration is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-7217A is specifically developed for car floor mats lamination. TPR-7217A is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-7217A is used for car floor mats lamination bonding.
| Application Material | Car Floor Mats Lamination Bonding |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | PSA Hot Melt Adhesive for Vehicle Interior Decoration |
| Solid Content | 100% |
| Operating Temperature |
160～180 ℃( Depend On Equipment, Substrate, Environment And Other Conditions) |
| Softening Temperature | About 125℃ |
| Melt Viscosity | About 18000mpa·s (180℃) |
| Peeling @180˚ | About 32N/2.5cm/45-55μm on Stainless Steel Plate |
| Usage Scope | Car Floor Mats Lamination Bonding |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
It is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store tWanli® PSA hot melt adhesive TPR-7217A where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
